特點
1.電動吸引器由負壓泵、負壓調節器、負壓指示器、收集容器組件、腳踏開關、機箱
組成;
2.可滿足各類醫院和醫療單位在醫療手術時需要高效率、大流量吸引的要求,供醫
療單位作手術吸引膿血和各種粘質分泌物用;
3、立式結構、設計新穎、外型美觀;
4、采用雙頭活塞式真空泵作為負壓吸引源,噪音小;
5、設有防溢流安全裝置,保養維護工作簡單,無需加油;
6、手動和腳踏開關并聯任意使用,操作方便;
7、電動吸引器按防電擊類型及程度分類為I類設備B型應用部分，運行模式為間歇
加載連續運行(間歇吸引), IPX0、非AP型或APG型普通設備;
8、產品符合GB9706.1. YY0505、YY0636.1相關要求。
技術指標
1、負壓極限值:≥0.09MPa (680mmHg) ;
2、負壓調節范圍:0.02~0.09MPa (150~680mmHg) ;
3、抽氣速率:泵口(出氣口)≥35L/min,終端≥25L/min;
4、電源:AC220V土22V, 50Hz士1Hz;
5.功率:≤280VA;
6、噪聲:< 60dB;
7、收集容器容量:2500mlX2;
8、工作環境:溫度+5°C~+35°C,相對濕度:25°C不超過80%,大氣壓力:86KPa~ 106KPa。
Features
1. The electric suction device consists of a negative pressure pump, a negative pressure regulator, a negative pressure indicator, a collection container assembly, a foot switch, and a chassis
composition;
2. It can meet the requirements of various hospitals and medical units that require high efficiency and large flow attraction during medical operations.
The treatment unit is used for surgery to attract pus and blood and various mucous secretions;
3. Vertical structure, novel design, beautiful appearance;
4. Double-head piston vacuum pump is used as the suction source of negative pressure, with low noise;
5. Equipped with anti-overflow safety device, maintenance work is simple, no need to refuel;
6. The manual and foot switch can be used in parallel, and the operation is convenient;
7. According to the type and degree of protection against electric shock, the electric suction device is classified as the application part of type I equipment and type B, and the operation mode is intermittent.
Load continuous operation (intermittent suction), IPX0, non-AP type or APG type ordinary equipment;
8. The product meets the relevant requirements of GB9706.1. YY0505 and YY0636.1.
Technical index
1. Negative pressure limit value: ≥0.09MPa (680mmHg);
2. Negative pressure adjustment range: 0.02~0.09MPa (150~680mmHg);
3. Pumping rate: pump port (air outlet) ≥35L/min, terminal ≥25L/min;
4. Power supply: AC220V ± 22V, 50Hz ± 1Hz;
5. Power: ≤280VA;
6. Noise: <60dB;
7.Capacity of collection container: 2500mlX2;
8. Working environment: temperature +5°C~+35°C, relative humidity: 25°C no more than 80%, atmospheric pressure: 86KPa~106KPa.
